SPG-3000-9/11.5-01-C(5)

The SPG-3000-9/11.5-01-Ts(5) is a straight, conical, faceted power support. Allows the use of brackets for four console lighting fixtures, as per GOST 9.307-2021.

Support designations:

• SPG - power straight-rack faceted;
• 3000 - permissible lateral static load at the top point of the barrel;
• 9/11.5 - support height/total height;
• 01 - air supply to the upper part of the support;
• C - the coating is applied by hot-dip galvanizing;
• (5) - steel thickness.

The support is protected from corrosion by hot-dip galvanizing (GOST 9.307-2021). With a zinc layer of 40 to 160 microns, the support has a service life of at least 30 years.

SPG-3000-9/11.5-01-C(5)

The SPG-3000-9/11.5-01-Ts(5) is made of flexible steel sheet welded with a longitudinal seam and protected from corrosion by hot-dip galvanizing in accordance with GOST standards. The upper section has a universal mounting point for the installation of appropriate brackets.

The upper part has a universal mounting point for installing appropriate brackets.

At the customer’s request, it is possible to manufacture without a connecting point.

Installation takes place directly into reinforced concrete foundations. The underground height is calculated individually. Foundation characteristics are determined by three factors: climatic conditions of the operating area, soil parameters, and geological surveys.