NP76/108-3/4-02-C
The final cost of the NP76/108-3/4-02-Ts support depends on the quantity and availability of manufactured products. Submit a request on our website, and our managers will contact you shortly to clarify the information.
NP76/108-3/4-02-Ts is a non-load-bearing, upright, cylindrical, round support. Allows the use of brackets for four console lighting fixtures, as per GOST 9.307-2021.
Support designations:
- NP - non-power straight-rack;
- 76/108 - upper link diameter/lower link diameter;
- 3/4 - support height/total support height;
- 02 - internal supply with maintenance through a side hatch in the lower part of the support;
- C - the coating is applied by hot-dip galvanizing;
The supports are protected from corrosion by hot-dip galvanizing (GOST 9.307-2021). With a zinc coating of 40 to 160 microns, the support has a service life of at least 30 years.
Support NP76/108-3/4-02-C
The tower's shaft is equipped with a special hatch with a protective cover. Suitable power, switching, safety, and other equipment is installed within it. The hatch's dimensions, shape, and quantity can be customized upon customer request.
The lower part of the support is an embedded part of the foundation and is installed directly into the concrete base. On both sides of the underground portion of the support are utility passages for cable entry.
AGRISOVGAZ plants produce a series of supports of various diameters and heights. The lower section diameter ranges from 108 to 159 mm, while the upper section ranges from 57 to 133 mm. The height of the pipe supports starts at 1 meter.
| Support type | non-forceful |
| Installation method |
upright |
| Weight | 25 kg |
| Height | 3 m |
| Height of the lower link | 1.2 m |
| Total height | 4 m |
| Bottom barrel diameter | 76 mm |
| Upper barrel diameter | 108 mm |
| Cable connection option | interior |
| Type of coating | hot-dip galvanizing |
Опоры освещения «АГРИСОВГАЗ» 
