NFG-8.5-02-C(4)
The final cost of the NFG-8.5-02-Ts(4) support depends on the quantity and availability of manufactured products. Submit a request on our website and our managers will contact you shortly to clarify the information.
NFG-8.5-02-Ts(4) is a non-load-bearing, flanged, canonical, faceted, standard support. Allows the use of brackets for four console lighting fixtures, as per GOST 9.307-2021.
Support designations:
- NFG - non-power flanged faceted;
- 8.5 – height of the support above the ground surface in meters;
- 02 - internal supply with maintenance through a side hatch in the lower part of the support;
- C - the coating is applied by hot-dip galvanizing;
- (4) - thickness of the support barrel material in mm.
Installation of the NFG-8.5-02-Ts(4) support
The supports are installed in reinforced concrete foundations, which are fitted with support embedded elements—either anchors or pipes. Embedded elements are selected for each support type and ordered separately. Foundation characteristics are determined based on the climatic conditions of the operating area and soil parameters, including the results of geological surveys.
The pole can accommodate lighting fixtures with four consoles. Pole heights range from 3 to 16 meters, spaced in 0.5-meter increments.
| Support type | non-forceful |
| Installation method | flanged |
| Flange size | 285x200x27 mm |
| Weight | 117 kg |
| Height | 8.5 m |
| Diameter of the inner top of the barrel | 60 mm |
| Diameter of the outer top of the barrel | 74 mm |
| Cable connection option | interior |
| Type of coating | hot-dip galvanizing |
| Material thickness | 4 mm |
| Detail for pipe insert | ZDT-24/4/K200 |
| Detail for anchor insert | ZDT-24/4/K200 |
Опоры освещения «АГРИСОВГАЗ» 
