KG(180)T1-NxV-C

KG(180)T1-NxV-Ts radius bracket for faceted and conical round supports.

Bracket designations:

• K - bracket;
• G - for installation on a faceted and conical round support.;
• 180 - diameter of the top of the support;
• T - T-shaped
• 1 - number of lighting fixtures on the bracket;
• H – height in meters (see technical specifications);
• B - reach in meters (see technical specifications);
• C - coating applied by hot-dip galvanizing.

Bracket KG(180)T1-NxV-C

A bracket allows you to direct light at a specific angle and provide the desired intensity. There are many types of mounts available to meet these needs.

A T-shaped bracket is designed for mounting floodlights that illuminate large open areas. The T-shaped bracket consists of a crossbar made of square or channel steel of a specific length, depending on the number and dimensions of the floodlights. The bracket is welded to a pipe, which is then used to mount it to the support.

Bracket for installation on a faceted or round conical support.

For a bracket designed for installation on non-load-bearing supports with a standard top diameter of 69 mm, the shaft diameter is not specified in the designation. Standard top diameters in the structural marking diagram for load-bearing faceted supports are: 90, 120, 180, and 250 mm. The crossbar length is determined by the dimensions and number of floodlights planned for installation on the bracket.